Merit Ion eVo Owner's Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
COPYRIGHT © 2006 MERIT ENTERTAINMENT
Site Preparation
In determining the location for your
Megatouch Ion™ video game, consideration
must be given to a suitable, grounded elec-
trical outlet. Since the game is a computer-
ized device, it should have a separate cir-
cuit, if at all possible. If a separate circuit is
not available, care should be taken to pro-
vide a clean and constant voltage. As a
basic guideline, never connect the unit to a
circuit that also supplies power to freezers,
coolers or other high power consuming and
electrical noise generating equipment. Place
the game in a location where nothing will
interfere with proper ventilation. The game
should not be exposed to any dripping or
splashing liquids. Objects filled with liquid
should not be placed on the unit.
Setting up your Megatouch Game
1. After removing the game from the car-
ton, attach the power cord to the back
of the game near the ON/OFF switch.
Plug the game into a standard AC out-
let.
2. Turn the power switch at the back of
the game to ON and wait for it to go
through its boot-up sequence. The
game will display the Main Menu Screen.
3. If you have a Mega-Lease™ game, you
must follow the steps in the MegaNet®
User Manual to connect to the server
in order to activate your game.
4. The machine has been preset at the
factory and therefore should not need
to be adjusted, however it is recom-
mended that the screen be calibrated
(see Screen Calibration) and the coin
or bill acceptor(s) be tested.
5. There are many custom settings avail-
able for the game. To customize the
settings, follow the software instruc-
tions in this manual.
Game Description
The Megatouch eVo model has 2 key-locked
compartments: the CPU section and the cash
tower section. It comes equipped with a
coin mech and/or bill acceptor. This model
also has couplers installed in the rear of the
game which are used for future hardware
upgrades including linking and modem ca-
pabilities. Each game comes equipped with
a wireless USB adapter which can be used
to wirelessly link two Ion games together by
simply turning the games on. With the addi-
tion of a wireless router, up to four games
can be linked and also connected to the
Internet. For more information, see Wire-
less Setup.
The eVo also has several additional wall
mounting kits. There is also an available
stand on which to place the game. Contact
your distributor to purchase any of these
additional parts.
CPU Section
The CPU section is accessible from the front
of the game. The CPU section houses the
LCD monitor, motherboard, I/O board, power
supply, hard drive, and the main harness.
Located on the control board (found inside
the CPU section near the hinge of the CPU
section door) are two internal switches,
SETUP and CALIBRATE (see Figure 30).
Pressing the SETUP button will bring you to
the Megatouch Setup Screen. See the next
section for calibration instructions.
Cash Tower Section
The coin mech/coin box/bill acceptor are ac-
cessible from the rear of the cabinet. The
cash tower is locked for security purposes.
See Figure 29. The coin mech is secured by
the metal tab to the left of the mech. For
electronic mechs, pull the tab to the left in
order to release the mech. For mechanical
mechs, you must first remove the coin pod
cover by removing the two screws located
on the bracket above the coin mech.
1 MEGATOUCH ION EVO OWNER’S MANUAL PM0426-19
Page view 2
1 2 3 4 5 6 7 8 ... 49 50

Comments to this Manuals

Vikimqe 04 Jan 2024 | 11:50:11

urenrjrjkvnm

Evayrr 07 Jan 2024 | 14:38:39

Med

Serznjl 11 Jan 2024 | 19:49:54

coin